Grand Cherokee 2WD V8-4.7L VIN J (2004)
5.
Remove the left side rear cargo hold-down loop and attaching screw.
6.
Remove the "D" pillar upper trim panel.
7.
From the rear of the vehicle, pull the left rear quarter trim panel away from the body quarter panel.
8.
Above the left rear wheel well remove the sound deadening panel from the opening in the inner quarter panel.
9.
From the space (cavity) between the inner and outer quarter panels, locate and remove the foam insulation bag containing the trailer tow harness
relays and circuit breaker.
10.
Peel back the bag insulation and install circuit breaker, p/n 56007290, into its connector.
11.
Fold the bag insulation back over the relays and circuit breaker and insert the foam insulation bag into the quarter panel cavity.
12.
Verify that the circuit breaker connector and other trailer tow related relays are properly isolated so as not to cause a rattle sound.
13.
Reverse steps 1 through 8 to install previously removed panels, cargo loops, and cargo shade.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
