Grand Cherokee 2WD V8-4.7L VIN J (2004)
Pdc Relay Cassette Latches-typical
2. From the top of the PDC housing, use a small screwdriver or a terminal pick tool (Special Tool Kit 6680) to release the two latches that secure the
relay cassette in the PDC.
3. Gently and evenly press the relay cassette down through the PDC housing.
Pdc Relay-typical
4. From the bottom of the PDC housing, remove the relay cassette from the PDC.
CAUTION: Do not remove the wiring and terminals from the terminal cavities of the faulty PDC relay cassette at this time. Refer to the
Assembly procedure that follows for the proper procedures for transferring the wiring and terminals to the replacement PDC relay cassette.
INSTALLATION
1. Move the faulty PDC relay cassette with its wiring away from the bottom of the PDC housing far enough to allow the replacement relay cassette to
be installed into the PDC.
2. Using the faulty relay cassette as a guide, be certain that the replacement relay cassette is correctly oriented before installing it into the PDC
housing.
