Grand Cherokee 2WD V8-4.7L VIN J (2004)
Power Distribution Center Connection
6. Remove the two nuts that secure the two-holed eyelet of the battery wire harness PDC take outs to the PDC B(+) terminal studs.
7. Remove the battery wire harness PDC take out eyelet from the B(+) terminal studs.
Power Distribution Center Remove/Install
8. Disengage the latches on the PDC housing mounts from the tabs on the PDC mounting stanchions of the battery support, and pull the PDC housing
upward to disengage the mounts from the stanchions.
9. Remove the PDC and the right headlamp and dash wire harness from the engine compartment as a unit.