Grand Cherokee 2WD V8-4.7L VIN J (2004)
Power Steering Fluid Cooler: Service and Repair
REMOVAL
1. Disconnect negative battery cable at battery.
2. Drain the power steering fluid out of the reservoir.
3. Remove the front fascia grille assembly.
4. Remove the grille opening reinforcement panel
5. Place a drain pan under the cooler.
6. Disconnect the lower hose at cooler.
7. Disconnect the upper hose at cooler.
8. Remove the three cooler mounting bolts.
9. Remove the cooler from the vehicle.
INSTALLATION
1. Position and install the power steering cooler to the vehicle.
2. Install the three mounting bracket bolts.
3. Reconnect the upper hose at cooler.
4. Reconnect the lower hose at cooler.
5. Connect negative battery cable to battery.
6. Refill the power steering fluid and bleed the system.
7. Start engine and check for leaks.
8. Install the grille opening reinforcement panel
9. Install the front fascia grille.
