Grand Cherokee 2WD V8-4.7L VIN J (2004)
into position.
8. Install the underdrive piston into the input clutch retainer and over the input clutch hub (Fig. 73).
9. Install the UD/OD balance piston return spring pack into the input clutch retainer.
10. Install Piston Guide 8252 into the input clutch retainer (Fig. 75) to guide the UD/OD balance piston seal into position inside the underdrive piston.
11. Install the UD/OD balance piston into the input clutch retainer and the underdrive piston.
12. Using Spring Compressor 8251, compress the UD/OD return spring pack and secure the piston in place with the snap-ring (Fig. 76).
13. Install the underdrive clutch pack into the input clutch retainer (Fig. 73).