Grand Cherokee 2WD V8-4.7L VIN J (2004)
Power Window Switch: Service and Repair
POWER WINDOW SWITCH
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the rear door.
Fig. 2 Rear Door Power Window Switch Remove/Install
3. Using a trim stick or another suitable wide flat-bladed tool, gently pry the sides of the switch receptacle on the back of the rear door trim panel
away from the perimeter of the power window switch to release the switch from the receptacle.
4. Remove the power window switch from the rear door trim panel switch receptacle.
INSTALLATION
1. Position the power window switch to the rear door trim panel switch receptacle.
2. Press firmly and evenly on the back of the power window switch until it snaps into rear door trim panel switch receptacle.
3. Install the trim panel onto the rear door.
4. Reconnect the battery negative cable.
