jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Windshield Washer Reservoir|Description and Operation|Page 8923 > < Windshield Washer Reservoir|Description and Operation
Page 1
background image

Windshield Washer Reservoir: Service and Repair

WASHER RESERVOIR

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove the air cleaner housing from the top of the left front fender wheel house.

Fig. 28 Washer Reservoir Filler Neck Mounting

3. Disconnect the two washer reservoir washer hoses from the two engine compartment washer hoses at the inline connectors located on the top of

the left front fender wheel house.

4. Open the washer reservoir filler cap and unsnap the filler cap hinge from the hook on the filler neck.
5. Remove the one screw that secures the washer reservoir filler neck to the left inner fender shield.
6. Raise and support the vehicle.
7. Remove the liner from the left front fender wheel house.

Windshield Washer Reservoir|Description and Operation|Page 8923 > < Windshield Washer Reservoir|Description and Operation