Grand Cherokee 2WD V8-4.7L VIN J (2004)
positioned over the rear wiper motor output shaft.
Fig. 11 Rear Wiper Arm Installation
2. Position the tab on the back of the rear wiper arm support on the liftgate park ramp in the Installation Position.
3. With the wiper arm in the Installation Position, push the tapered mounting hole on the pivot end of the wiper arm down over the rear wiper motor
output shaft.
4. Install and tighten the nut that secures the rear wiper arm to the rear wiper motor output shaft. Tighten the nut to 18 Nm (13 ft. lbs.).
5. Close the rear wiper arm pivot cover
6. Lift the rear wiper arm support away from the park ramp, then place the wiper arm support in the park ramp in the Park Position.
