Grand Cherokee 2WD V8-4.7L VIN N (2000)
increments. The default is 12000 kilometers 7500 miles. The selected distance becomes the interval at which the Perform Service warning message
will be displayed by the EVIC. If a new distance is selected, a second programmable feature appears, RESET SERVICE DISTANCE? - The
options include No and Yes. The default is Yes. When Yes is selected, the accumulated distance since the last previous Perform Service warning
message will be reset to zero because the service interval has been changed. When No is selected, the distance until the next Perform Service
warning message is reduced by the accumulated distance since the last previous message.
-
LOW FUEL CHIME? - The options include Yes and No. The default is Yes. When Yes is selected, a single chime will sound as an audible alert
whenever the instrument cluster low fuel warning lamp lights. The chime will sound only once per ignition cycle. When No is selected, only the
low fuel warning lamp in the instrument cluster will light and no chime will sound.
-
EASY EXIT SEAT? - This programmable feature only applies to vehicles equipped with the optional memory system. The options include Yes
and No. The default is No. When Yes is selected, the driver seat moves rearward about 55 millimeters two inches. or to the farthest rearward
position, whichever comes first, when the key is removed from the Ignition switch lock cylinder. This provides additional ease for exiting from the
vehicle. The seat will automatically return to the memory system setting position when the Driver 1 or Driver 2 button of the memory switch on
the door panel is depressed or, if the REMOTE LINKED TO MEMORY programmable feature is enabled, when the RKE Unlock button is
depressed. While not automatic, an easy entry feature can be obtained by enabling the EASY EXIT SEAT feature and disabling the REMOTE
LINKED TO MEMORY feature. Then the EASY EXIT SEAT feature will move the seat back, but the RKE unlock event will not reposition the
seat. Thus, the seat remains positioned for easy entry, and the memory switch on the door panel can be depressed after entering the vehicle to
return the seat to the desired memory position.
Compass Variation Adjustment
COMPASS VARIATION ADJUSTMENT
Compass variance, also known as magnetic declination, is the difference in angle between magnetic north and true geographic north. In some
geographic locations, the difference between magnetic and geographic north is great enough to cause the compass to give false readings. If this
problem occurs, the compass variance setting may need to be changed.
To set the compass variance:
Compass Variance Settings
1. Using the Variance Settings map, find your geographic location and note the zone number.
2. Turn the ignition switch to the ON position. If the compass/thermometer data is not currently being displayed, momentarily depress and release
the C/T push button to reach the compass/thermometer display.
3. Depress the RESET push button and hold the button down until "VARIANCE = XX " appears in the display. This takes about five seconds.
4. Release the Reset push button. "VARIANCE = XX " will remain in the display. "XX " equals the current variance zone setting.
5. Momentarily depress and release the STEP push button to step through the zone numbers, until the zone number for your geographic location
appears in the display.
