jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Technician Safety Information|Page 6375 > < Technician Safety Information|Page 6373
Page 1
background image

Memory Positioning Module: Description and Operation

All Limited models are equipped with a standard memory system. However, there are two versions of the Memory Seat Module (MSM). The standard
version of the MSM is used on vehicles that are not equipped with the optional heated seat system. A Memory Heated Seat Module (MHSM) is used on
vehicles that are equipped with the heated seat system option. A third module, the Heated Seat Module (HSM), does not have any memory system
capabilities and is only available on Laredo models that are equipped with an optional heated seat system.

All three modules are packaged in an identical molded plastic housing which is mounted on a bracket that is located between the power scat track and the
seat cushion frame under the forward edge of the driver side front seat cushion. The MSM or MHSM is used to control all of the driver side power seat
memory functions and features. The MSM or MHSM contains a central processing unit and interfaces with other electronic modules in the vehicle on the
Programmable Communications Interface (PCI) data bus network.

For diagnosis of the MSM, MHSM or the PCI data bus, a DRB scan tool and the proper Diagnostic Procedures are recommended. The MSM or MHSM
cannot be adjusted or repaired and, if faulty or damaged, it must be replaced.

The MSM receives hard wired inputs from the power seat switch and the potentiometers on each of the driver side power seat motors. The MSM
receives messages over the PCI data bus from the Driver Door Module (DDM) (memory switch status), the Powertrain Control Module (PCM) (vehicle
speed status), and the Body Control Module (seat belt switch status). The programming in the MSM allows it to process the information from these
inputs and send control outputs to each of the driver side power seat motors. The MSM will prevent the seat memory recall function from being initiated
if the driver side seat belt is buckled, if the transmission gear selector lever is not in the Park or Neutral positions, or if the vehicle is moving.

Technician Safety Information|Page 6375 > < Technician Safety Information|Page 6373