Grand Cherokee 2WD V8-4.7L VIN N (2000)
Rear Door Interior Handle: Service and Repair
INSIDE HANDLE ACTUATOR
REMOVAL
1. Remove the trim panel.
2. Disconnect latch and lock rods from inside handle actuator.
Fig. 6
3. Remove screws attaching inside handle actuator to trim panel (Fig. 6).
4. Separate inside handle actuator from trim panel.
INSTALLATION
1. Position inside handle actuator in trim panel.
2. Install screws attaching inside handle actuator to trim panel (Fig. 6).
3. Connect latch and lock rods to inside handle actuator.
4. Install door trim panel.
