Grand Cherokee 2WD V8-4.7L VIN N (2000)
Fender/Quarter Panel
Fig. 3
1. Remove the screws at wheel opening (Fig. 3).
2. Using a trim stick C-4755 or equivalent, gently pry bottom of cladding up.
3. Lift upwards and remove cladding.
INSTALLATION
Doors
1. Clean the area thoroughly with MOPAR(R) Super Kleen, or equivalent.
2. Align the body side cladding with the slots in the door. Press the adhesive pad to the door and snap the retainers into the slots.
Fender/Quarter Panel
1. Thoroughly clean the area with MOPAR(R) Super Kleen, or equivalent.
2. Align the cladding with the screw holes in the fender.
3. Press the cladding in place.
4. Install the screws at the wheel opening.