jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Cowl Trim|Page 6975 > < Cowl Trim|Page 6973
Page 11
background image

Fig. 8

The d-pillar trim is attached to the d-pillar with spring clips (Fig. 8).

1. Remove liftgate opening upper trim panel.
2. Grasp d-pillar trim and pull outward from d-pillar.
3. Separate d-pillar trim from d-pillar.

INSTALLATION 

1. Position d-pillar trim panel at d-pillar and press into place.
2. Install upper liftgate opening trim panel.

Cover Fuel Filler

COVER - FUEL FILLER 

REMOVAL 

NOTE:  In the event of a collision, the fuel filler cover is serviceable using the following procedure.

Fig. 18

1. Remove the push pin fasteners. (Fig. 18)
2. Using a chisel or other suitable tool, remove the damaged cover.
3. Remove any remaining adhesive and clean mating surfaces.

INSTALLATION 

NOTE:  In the event of a collision, the fuel filler cover is serviceable using the following procedure.

Cowl Trim|Page 6975 > < Cowl Trim|Page 6973