jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Power Seat Motor Position Sensor > < Power Door Lock Switch|Description and Operation
Page 1
background image

Power Mirror Switch: Description and Operation

Both the right and left power outside mirrors are controlled by a single multi-function switch unit located on the driver side front door trim panel. The 
power mirror switch unit includes a three-position rocker selector switch and four momentary directional push button switches.

The power mirror switch unit is integral to the Driver Door Module (DDM). The power mirror switch cannot be repaired or adjusted and, if faulty or
damaged, the entire DDM unit must be replaced. Refer to Door Module in the Power Lock System for the DDM service procedures.

The power mirror selector switch is moved right (right mirror control), left (left mirror control), or center to turn the power outside mirror system off.
When the selector switch is in the right mirror control or left mirror control position, one of the four directional control buttons is depressed to control
movement of the selected mirror up, down, right, or left. When the selector switch is in the Off position, depressing any of the directional switches will
not change either mirror position.

See the owner's manual in the vehicle glove box for more information on the features, use and operation of the power mirror switches.

Power Seat Motor Position Sensor > < Power Door Lock Switch|Description and Operation