Grand Cherokee 2WD V8-4.7L VIN N (2000)
hardened bearing surface of the bearing MUST face the nut). Then the hardened washer slides onto the threaded rod (Fig. 66). Once assembled
coat the threaded rod's threads with Mopar Nickel Anti-Seize or (Loctite No. 771).
Fig. 67
3. Using Special Tool 8512, press damper onto crankshaft (Fig. 67).
4. Install then tighten crankshaft damper bolt to 175 Nm (130 ft. lbs.).
5. Install fan blade assembly.
6. Install radiator upper shroud and tighten fasteners to 11 Nm (95 in. lbs.).
7. Connect electrical connector for shroud fan.
8. Install radiator upper hose.
9. Install accessory drive belt.
10. Refill cooling system.
11. Connect negative cable to battery.
