jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Air Door, HVAC > < Accumulator HVAC|Specifications|Page 5785
Page 2
background image

5. Install the low pressure cycling clutch switch onto the accumulator fitting
6. Connect the battery negative cable.
7. Evacuate the refrigerant system.
8. Charge the refrigerant system.

NOTE:  If the accumulator is replaced, add 120 ml (4 fluid ounces) of refrigerant oil to the refrigerant system. Use only refrigerant oil of the type
recommended for the compressor in the vehicle.

Air Door, HVAC > < Accumulator HVAC|Specifications|Page 5785