jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Technician Safety Information|Page 3585 > < Technician Safety Information|Page 3583
Page 2
background image

Fig. 18 Disconnecting Single - Tab Type Fitting

a. Press release tab on side of fitting to release pull tab (Fig. 18). If release tab is not pressed prior to releasing pull tab, pull tab will be damaged.
b. While pressing release tab on side of fitting, use screwdriver to pry up pull tab (Fig. 18).

Fig. 19 Removing Pull Tab

c. Raise pull tab until it separates from quick-connect fitting (Fig. 19).

Technician Safety Information|Page 3585 > < Technician Safety Information|Page 3583