Grand Cherokee 2WD V8-4.7L VIN N (2000)
Powertrain Control Module: Service and Repair
Powertrain Control Module Replacement
Fig. 32 Powertrain Control Module (PCM) Location
The PCM is located on the cowl panel in right/rear side of engine compartment.
REMOVAL
To avoid possible voltage spike damage to PCM, ignition key must be off; and negative battery cable must be disconnected before unplugging PCM
connectors.
1. Disconnect negative battery cable at battery.
2. If equipped, remove Transmission Control Module (TCM).
3. Remove coolant reserve/overflow tank.
4. Remove cover over electrical connectors. Cover snaps onto PCM.
5. Carefully unplug three 32-way connectors at PCM.
Fig. 33 Powertrain Control Module (PCM) 32 - Way Connectors
