Grand Cherokee 2WD V8-4.7L VIN N (2000)
Wheel Speed Sensor: Service and Repair
Rear
REMOVAL
1. Raise and fold rear seat forward. Then move carpeting aside for access to rear sensor connectors.
2. Disconnect rear sensor wire at harness connectors).
3. Push sensor wires and grommets through floorpan holes.
4. Raise and support the vehicle.
5. Disengage sensor wire from axle and chassis brackets and from brake line retainers.
6. Remove the sensor mounting bolt from the rear brake backing plate.
7. Remove sensor from the backing plate.
INSTALLATION