Grand Cherokee 2WD V8-4.7L VIN N (2000)
Crankshaft Position Sensor: Service and Repair
REMOVAL
CKP Sensor Location
The Crankshaft Position (CKP) sensor is bolted to the side of the engine cylinder block above the starter motor. It is positioned into a machined hole
at the side of the engine block.
1. Remove starter motor. Refer to Starter Removal/installation.
2. Disconnect CKP electrical connector at sensor.
CKP Sensor Remove/Install
3. Remove CKP mounting bolt.
4. Carefully pry sensor from cylinder block in a rocking action with two small screwdrivers.
