jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Wiper Blade > < Front Wiper Arms Replacement|Page 8190
Page 1
background image

Wiper Arm: Service and Repair
Rear Wiper Arm Replacement

REMOVAL

1. Disengage the rear wiper arm support from the rubber rear wiper arm park ramp on the right side of the liftgate just below the flip-up glass.
2. Lift the wiper arm and blade away from the liftgate until the wiper arm hinge is in its over-center position.

Rear Wiper Arm Park Ramp Remove/Install

3. Remove the screw that secures the park ramp to the liftgate.
4. Remove the rear wiper arm park ramp from the liftgate.

INSTALLATION

1. Position the rear wiper arm park ramp onto the liftgate.
2. Install and tighten the screw that secures the park ramp to the liftgate. Tighten the screw to 6.8 Nm (60 in. lbs.).
3. Lower the wiper arm and blade gently onto the liftgate rear wiper arm park ramp.

Wiper Blade > < Front Wiper Arms Replacement|Page 8190