jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Main Relay (Computer/Fuel System) > < Idle Speed/Throttle Actuator - Electronic|Removal
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: Service and Repair
Installation

INSTALLATION 4.7L

1. Install IAC motor (2) to throttle body.

2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque (4).

3. Install electrical connector.

4. Install air resonator to throttle body.

Main Relay (Computer/Fuel System) > < Idle Speed/Throttle Actuator - Electronic|Removal