Grand Cherokee 2WD V8-5.2L VIN Y (1998)
(5) Remove the four screws securing the lower edge of the knee blocker to the lower instrument panel reinforcement.
Knee Blocker Remove/Install
(6) Using a trim stick or other suitable wide flat-bladed tool, gently pry the edges of the knee blocker away from the instrument panel at the locations
shown.
(7) Remove the knee blocker/steering column cover from the vehicle.
(8) Reverse the removal procedures to install.
Cluster Bezel
CLUSTER BEZEL
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
(1) Disconnect and isolate the battery negative cable.
(2) Remove the left and right switch pod bezels as described.
Cluster Bezel Screws Remove/Install
(3) Remove the nine screws securing the cluster bezel to the instrument panel.
(4) Pull the cluster bezel rearward and move it to the left of the steering wheel to remove it from the vehicle.