Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Console: Service and Repair
Garage Door Opener Storage Bin Door
REMOVAL AND INSTALLATION
1. Open the garage door opener storage bin door.
2. Using a trim stick or another suitable wide flat-bladed tool, gently pry between the door pivot pin and the pivot hole on one side of the overhead
console housing until the pivot pin clears the pivot hole.
3. Use a gentle twisting action to remove the garage door opener storage bin door from the overhead console housing.
4. To install, insert the pivot pin on one side of the door into the pivot hole in the overhead console housing. Gently depress the pivot pin tab on the
other side of the door until it clears the side of the garage door opener storage bin opening and push the door into the opening. Guide the door into
the opening so that the pivot pin snaps into the pivot hole.
