Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Caliper Mounting Bolts
6. Remove caliper mounting bolts.
Caliper Removal
7. Tilt top of caliper outward with pry tool if necessary and remove caliper.
8. Remove caliper from vehicle.
INSTALLATION
Caliper Lubrication Points
1. Clean brake shoe mounting ledges with wire brush and apply light coat of Mopar multi-mileage grease to surfaces.
2. Connect brake hose to caliper with new washer on both sides of hose fitting. Do not tighten fitting bolt completely at this time.