jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Thermostat Bypass Hose|Description and Operation|Page 2254 > < Thermostat Bypass Hose|Description and Operation|Page 2252
Page 2
background image

If equipped with A/C, the generator and A/C compressor along with their common mounting bracket must be partially removed. Removing generator
or A/C compressor from their mounting bracket is not necessary. Also, discharging A/C system is not necessary. Do not remove any refrigerant lines
from A/C compressor.

WARNING:   The air system is under pressure even with engine off. 

1. Disconnect negative battery cable from battery. 
2. Partially drain cooling system.

Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse.

3. Remove upper radiator hose clamp and hose at radiator.
4. Unplug wiring harness from A/C compressor.
5. Remove air duct at throttle body.
6. Disconnect A/C lines from clip at intake manifold.

Thermostat Bypass Hose|Description and Operation|Page 2254 > < Thermostat Bypass Hose|Description and Operation|Page 2252