Grand Cherokee 2WD V8-5.2L VIN Y (1998)
(4) Work around the perimeter of the cluster depressing the snap clips that secure the cluster lens to the cluster hood, and gently pull the lens away from
the cluster.
(5) Reverse the removal procedures to install.
Cluster Hood and Mask
CLUSTER HOOD AND MASK
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
(1) Disconnect and isolate the battery negative cable.
(2) Remove the cluster lens from the instrument cluster as described.
Instrument Cluster Components
(3) Work around the perimeter of the cluster depressing the snap clips that secure the cluster hood to the cluster housing, and gently pull the hood away
from the cluster.
(4) Lift the cluster mask off of the locating pins on the front of the cluster housing.
(5) Reverse the removal procedures to install.
Cluster Rear Cover
CLUSTER REAR COVER
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO PASSIVE RESTRAINT SYSTEMS BEFORE ATTEMPTING
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE
THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
(1) Disconnect and isolate the battery negative cable.
(2) Remove the instrument cluster from the instrument panel as described.
(3) Work around the perimeter of the cluster releasing the snap clips that secure the rear cover to the back of the cluster housing, and gently pull the rear
cover away from the cluster housing.
(4) Reverse the removal procedures to install.