Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Glove Box Lamp: Service and Repair
REMOVAL AND INSTALLATION
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIRBAGS SYSTEMS BEFORE ATTEMPTING ANY STEERING
WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE
PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Remove the glove box module from the instrument panel. See Glove Box Module procedures.
Glove Box Latch Striker Remove/Install
2. From the top of the glove box module, straighten the two mounting tabs that secure the glove box latch striker to the glove box module.
3. Remove the latch striker through the upper glove box opening of the glove box module.
4. To install the latch striker, insert the mounting tabs through the slots in the upper glove box opening of the glove box module, and bend the tabs
over from the top of the glove box module.