Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
Fog Lamp
1. Remove the screws attaching the access cover to the bottom of the fog lamp.
2. Remove spring clip securing bulb to fog lamp.
3. Disconnect wire connectors at bulb.
4. Remove bulb element from fog lamp.
INSTALLATION
CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb lite will result.
1. Position bulb element in fog lamp.
2. Connect wire connectors at bulb.
3. Install spring clip securing bulb to fog lamp.
4. Install screws attaching the access cover to the bottom of the fog lamp.
