Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Airbag Trim Cover Retainers Remove/Install
7. Disengage the five trim cover locking blocks from the lip around the outside edge of the airbag housing and remove the housing from the cover.
WARNING: USE EXTREME CARE TO PREVENT ANY FOREIGN MATERIAL FROM ENTERING THE DRIVER SIDE AIRBAG
MODULE, OR BECOMING ENTRAPPED BETWEEN THE DRIVER SIDE AIRBAG MODULE TRIM COVER AND THE DRIVER
SIDE AIR-BAG MODULE. FAILURE TO OBSERVE THIS WARNING COULD RESULT IN OCCUPANT INJURIES UPON
AIRBAG DEPLOYMENT.
Driver Side Airbag Trim Cover Remove/Install
8. When installing the trim cover and horn switch, be certain that the locking blocks are fully engaged on the lip of the airbag housing and that the
horn switch feed wire is captured between the lip of the airbag housing and the locking block.
