jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Driver Side Airbag Trim Cover and Horn Switch|Page 8919 > < Driver Side Airbag Trim Cover and Horn Switch|Page 8917
Page 3
background image

Driver Side Airbag Trim Cover Locking Blocks Engaged

9. When installing the upper and lower trim cover retainers, be certain that the tabs on each retainer are engaged in the retainer slots of the trim

cover.

10. install and tighten the trim cover retainer nuts to 10 N.m (90 in. lbs.).
11. Reverse the remaining removal procedures to complete the installation, but do not connect the battery negative cable at this time. See Airbag

System in the Diagnosis and Testing for the proper procedures.

 

Driver Side Airbag Trim Cover and Horn Switch|Page 8919 > < Driver Side Airbag Trim Cover and Horn Switch|Page 8917