Grand Cherokee 2WD V8-5.2L VIN Y (1998)
Governor: Service and Repair
Removal and Installation
REMOVAL
1. Hoist and support vehicle on safety stands.
2. Remove transmission fluid pan and filter.
Governor Solenoid And Pressure Sensor
3. Disengage wire connectors from pressure sensor and solenoid.
4. Remove screws holding pressure solenoid retainer to governor body.
Pressure Solenoid Retainer
5. Separate solenoid retainer from governor.
Pressure Solenoid And O-ring
6. Pull solenoid from governor body.
7. Remove bolts holding governor body to valve body.
