Grand Cherokee 2WD V8-5.7L (2010)
Rocker Arm Assembly: Service and Repair
Valve Rocker Arm - Installation
INSTALLATION
CAUTION: The longer pushrods are for the exhaust side and the shorter pushrods are for the intake side.
1. Install the pushrods in the same order as removed.
2. Install the pushrod retainer 9070 (1).
CAUTION: Make sure that the retainers (1) and the rocker arms (2) are not overlapped when tightening bolts or engine damage could result.
CAUTION: Verify the pushrod(s) are installed into the rocker arm(s) (2) and the tappet(s) correctly while installing the rocker shaft assembly
(3) or engine damage could result. Recheck after the rocker shaft assembly has been tightened to specification.