Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Driver/Vehicle Information Display: Service and Repair
EVIC Switch Removal and Installation
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel center bezel (1).
3. Remove the four upper instrument panel switch pod (3) fasteners front the center bezel (1).
INSTALLATION
1. Position the upper instrument panel switch pod (3) into the instrument panel center bezel (1).
2. Install the four upper instrument panel switch pod (3) fasteners.
3. Install the instrument panel center bezel (1).
4. Connect the battery negative cable.
