Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Driver/Vehicle Information Display: Service and Repair
Universal Transmitter
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console assembly.
3. Remove the Electronic Overhead Module (EOM) retaining screws (2) and separate the EOM from the overhead console.
INSTALLATION
NOTE: In addition to the Universal Transmitter operation the Electronic Overhead Module (EOM) is responsible for some of the compass functions.
Anytime the EOM is replaced the compass variance value must be set.
1. Position the EOM onto the overhead console assembly and install the retaining screws (2).
2. Install the overhead console assembly.
3. Connect the battery negative cable.
4. Program the universal transmitter codes.
