jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6835 > < M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6833
Page 4
background image

9.

Rotate the plastic clip in the counterweight hole.

10.

Install the latch rod to the plastic clip. Verify that the latch rod is fully engaged to the clip.

11.

Verify repair.

12.

Install the glass run channel and attaching bolts. Tighten the attaching bolts to 10 Nm (90 in. lbs.).

13.

Verify correct window glass operation.

14.

Install the water shield.

15.

Replace the door trim panel plastic retainers.

16.

Install the door trim panel to the door.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

Technical Service Bulletin # 23-013-05

Date: 

050301

Body - Driver's Door Lock Freezes in Extreme Cold

NUMBER: 23-013-05

GROUP: Body

DATE: March 01, 2005

SUBJECT:
Door Lock Key Cylinder May Freeze And Not Turn In Left Front Door Exterior Handle

OVERVIEW:
This bulletin involves replacing the left front door exterior handle.

MODELS:

2005

(WK)

Grand Cherokee

NOTE:

This bulletin applies to vehicle built prior to January 11, 2005 (MDH 0111XX).

M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6835 > < M/T (6 Speed) - Won't Stay in Reverse Gear|Page 6833