jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Body - Squeaking Noise When Using Outside Door Handle|Page 6896 > < Body - Squeaking Noise When Using Outside Door Handle|Page 6894
Page 8
background image

9.

Rotate the plastic clip in the counterweight hole.

10.

Install the latch rod to the plastic clip. Verify that the latch rod is fully engaged to the clip.

11.

Verify repair.

12.

Install the glass run channel and attaching bolts. Tighten the attaching bolts to 10 Nm (90 in. lbs.).

13.

Verify correct window glass operation.

14.

Install the water shield.

15.

Replace the door trim panel plastic retainers.

16.

Install the door trim panel to the door.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

Body - Squeaking Noise When Using Outside Door Handle|Page 6896 > < Body - Squeaking Noise When Using Outside Door Handle|Page 6894