Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
3. Disconnect the interior handle actuator rod (3) from the front door latch (1) and remove the rod.
4. Disconnect the door wire harness connector (2) from the front door latch.
5. Remove the three bolts (4) that secure the front door latch to the door and remove the latch and actuator rods as an assembly.
6. If required, remove all of the actuator rods from the actuator.
INSTALLATION
1. If removed, install the actuator rods onto the front door latch (1) and engage the retainers.
2. Connect the door wire harness connector (2) to the front door latch.
3. Position the front door latch and actuator rods into the door as an assembly.
4. Install the three bolts (4) that secure the front door latch to the door. Tighten the bolts to 10.5 N.m (95 in.lbs.).
5. Install the interior handle actuator rod (3) onto the front door latch and engage the retainer.
