jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Front Door Striker|Service and Repair > < Procedures|Page 6910
Page 1
background image

Front Door Striker: Adjustments

ADJUSTMENT

1. Locate the access hole in the door to adjust the door latch (1) and remove the MYLAR tape (2).
2. Loosen the adjustment screw (3).
3. Operate the door handles several times to reduce any possible linkage binding and tighten the adjustment screw to 3 N.m (30 in. lbs.).
4. Operate the door handle again to verify proper operation and reinstall the MYLAR tape.

Front Door Striker|Service and Repair > < Procedures|Page 6910