jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Rear Door Window Glass Weatherstrip|Service and Repair|Page 6982 > < Rear Door Striker|Adjustments|Page 6977
Page 1
background image

Rear Door Window Glass Weatherstrip: Service and Repair

CHANNEL-GLASS 

REMOVAL 

1. Remove the watershield. Refer to Rear Door Panel.

2. Remove the weatherstrip from the rear glass run channel (2).
3. Loosen the bolt (3) that secures the top of the rear glass run channel to the keyed hole on the inside door panel.
4. Remove the bolt (4) that secures the bottom of the run channel to the inside door panel.
5. Lift the rear glass run channel upward within the door far enough to disengage the bolt that secures the top of the run channel to the keyed hole on

the inside door panel.

6. Remove the rear glass run channel from the door.

INSTALLATION 

Rear Door Window Glass Weatherstrip|Service and Repair|Page 6982 > < Rear Door Striker|Adjustments|Page 6977