jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Interior Moulding / Trim|Console > < Body and Frame|Service and Repair
Page 1
background image

Carpet: Service and Repair

CARPETS AND FLOOR MATS 

REMOVAL 

1. Remove the front seats.
2. Remove the rear passenger seat cushion.
3. Remove the floor console.
4. Remove the park assist module, the final drive control module, and the park assist / final drive control module mounting bracket.
5. Remove the front door sill scuff plates, Refer to Trim Panel.
6. Remove the cowl trim panels, refer to Trim Panel.
7. Remove the rear passenger door sill scuff plates, refer to Trim Panel.
8. Remove the lower B-pillar trim panels, Refer to Trim panel.
9. Remove the carpet from the vehicle.

INSTALLATION 

1. Install the carpet in the vehicle.
2. Install the floor console.
3. Install the lower B-pillar trim panels.
4. Install the rear passenger door sill scuff plates.
5. Install the cowl trim panels.
6. Install the front door sill scuff plates.
7. Install the park assist / final drive control module mounting bracket, the park assist module, and the final drive control module.
8. Install the rear passenger seat cushion.
9. Install the front seats.

Interior Moulding / Trim|Console > < Body and Frame|Service and Repair