Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
5. Engage the seat belt lower anchor under the loosened bolt that secures the lower anchor and the rear seat back bracket to the rear floor panel. Be
certain the seat belt webbing between the turning loop and the lower anchor is not twisted.
6. Tighten the bolt (3) that secures the lower anchor and the rear seat back bracket to the rear floor panel. Tighten the bolt to 50 N.m (37 ft.lbs.).
7. Reinstall the rear seat cushion into the vehicle.
D-Pillar Trim
D-PILLAR TRIM
REMOVAL