jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Procedures|Page 7197 > < Procedures|Page 7195
Page 19
background image

1. Remove the upper liftgate trim panel, Refer to Trim Panel.

2. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the D-pillar trim panel to the retaining clips in the D-pillar and

remove the trim panel.

INSTALLATION 

1. Position the locating tabs on the bottom of the D-pillar trim panel into the slots in the top of the quarter trim panel.

Procedures|Page 7197 > < Procedures|Page 7195