Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
10. Remove the two screws that secure the quarter trim panel to the quarter panel.
11. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the quarter trim panel to the quarter panel.
12. Pull the quarter trim panel away from the quarter panel.
13. If equipped, disconnect the power outlet wire harness connector.
14. Remove the quarter trim panel.
INSTALLATION
1. Position the quarter trim panel in the vehicle.
2. If equipped, connect the wire harness connector to the power outlet.
3. Position the flange on the quarter trim panel into the seal ditch and secure the bottom clip first and then the middle clip.
4. Align the two fastener holes in the quarter trim panel with the two fastener holes in the quarter panel and engage the retaining tabs that secure the
quarter trim panel to the quarter panel.
5. Install the two screws that secure the quarter trim panel to the quarter panel.
6. Install the load floor.
7. Install the D-pillar trim panel.
