Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
6. Remove and discard the O-ring (2) securing rotor (1) to axle studs.
7. Remove rotor (1) off axle studs.
INSTALLATION
1. Install rotor on axle studs.
2. Install the caliper assembly.
3. Install caliper slide bolts (4) and tighten to 90 - 115 Nm (66 - 85 ft. lbs.).
4. Install wheel and tire assembly.
5. Remove support and lower the vehicle.
6. Pump brake pedal until caliper pistons and brake shoes are seated.