Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
10. Install the five screws (1) that secure the heater core and tube cover to the HVAC housing. Tighten the screws to 2.2 N.m (20 in. lbs.).
11. Install the instrument panel.. Refer to Instrument Panel, Gauges and Warning Indicators/ Instrument Cluster / Carrier/ Service and Repair/
Procedures. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster / Carrier/Service and Repair
12. If disconnected, connect the heater hoses to the heater core tubes in the engine compartment.
13. Connect the negative battery cable.
14. If the heater core is being replaced, flush the cooling system.
15. Refill the engine cooling system.
