jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

All Technical Service Bulletins for Control Module HVAC: > < A/C - Settings Drift/Slow to Adjust/Increment Too Small|Page 5772
Page 6
background image

d.

Verify that the new HVAC ATC module software version level is "5.00.00.

NOTE:

Due to the ECU programming procedure, a DTC may be set in other modules (PCM, TCM, FCM, BCM, MIC, SKREEM, etc.) within the vehicle, if
so equipped. Some DTC's may cause the MIL to illuminate. From the "Home" screen select "System View". Then select "All DTC's". Press "Clear
All Stored DTC's" if there are any DTC's shown on the list.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

All Technical Service Bulletins for Control Module HVAC: > < A/C - Settings Drift/Slow to Adjust/Increment Too Small|Page 5772