jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Removal and Replacement|Page 5906 > < Removal and Replacement|Page 5904
Page 6
background image

2. Install the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3), rear outlet-air door (4) and the blend-air door (5)

into the passenger side air distribution housing (6) as required. Align the air doors with the pivot shaft holes in the housing.

3. If removed, align the front floor-air doors (1 and 3) with each other and install then into the center partition (2). Make sure that the air door

retaining tabs (4) are fully engaged.

Removal and Replacement|Page 5906 > < Removal and Replacement|Page 5904