jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

EVIC Switch Removal and Installation|Page 7903 > < EVIC Switch Removal and Installation
Page 1
background image

Driver/Vehicle Information Display: Service and Repair
Overhead Console

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Pull downward on the sides of the overhead console housing firmly and evenly to disengage the snap clips from the overhead console bracket.

3. Lower the overhead console from the headliner far enough to access the wire harness connectors (2).
4. Disconnect the roof wire harness connectors (2) from the overhead console wire harness connector.
5. Remove the overhead console from the headliner.

INSTALLATION

EVIC Switch Removal and Installation|Page 7903 > < EVIC Switch Removal and Installation