Grand Cherokee 2WD V8-5.7L VIN 2 (2005)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
1. Access the rear of the fog lamp assembly by removing the inner fender well to lower front fasica push pins.
2. Disconnect the fog lamp harness connector from the fog lamp (1).
3. Rotate the fog lamp (1) 1/4 turn counterclockwise.
4. Remove the fog lamp from lamp unit.
INSTALLATION
CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
1. Position the fog lamp (1) in fog lamp unit.
2. Rotate the fog lamp 1/4 turn clockwise.
3. Connect the fog lamp harness connector.
4. Align the inner fender well with the lower front fascia and install the push pins.
